2022 Dirt Dog PA Series PA8

Information

2022 Dirt Dog PA Series PA8

Aerators & Pluggers – Pasture Aerator

Dirt Dog’s PA Series pull-type Pasture Aerators are ideal in agricultural conservation tillage and pasture renovations. The heavy-duty, knife-like tines on the aerator are designed with a twist in them to break-up compacted soil horizontally and vertically as they slice into the ground in a twisting fashion. This breaking action conditions the soil to soak up run-off water faster, allow fertilizer to penetrate deeper into the ground, and increase oxygen and water supplies to the plant roots. The built-in, metal weight box allows you to add any type of weight to help the aerator tines penetrate into the ground and reach maximum depth.

Features may include:

  • 4” x 4” x 5/16” frame construction
  • Hydraulically adjustable transport wheels standard
  • All metal weight box available
  • Heavy duty grease able bearings
  • Rotors can be adjusted from 2 1/2, 5 and 7 1/2 degrees
  • Tines spaced 7 1/2" apart
  • Tines are designed with a twist to lift while fracturing the soil sideways
  • Available in Yellow, Red, Orange, Green and Blue

Photos

Highlights

  • Yulee, Florida
  • 2022
  • Dirt Dog
  • PA Series PA8
  • Available

Specifications

  • 2022
  • Dirt Dog
  • PA Series
  • PA8
  • Aerators
  • 40-90 hp
  • & Wheels: 9.5L x 15 8 PLY RIB TL ROLLED RIM 5 ON 5.5 BHC
  • Heavy duty pull type with clevis hitch 1.25" max pin dia
  • Tine Hub Spacing: 7 1/2" | Tine Penetration: Up to 8.125" depending on ground condition | Frame Construction: 4" Sq. tubing all welded construction | Main Tongue Beam: 4" Sq. | Hitch Jack: 10" top wind jack mounted to frame | Rotor/Tine Support Hangers: 1" x 7" heavy duty hangers | Rotor Bearing Protection: .375" x 3.5" metal housing | Rotor Angle Adjustment: 2.5°, 5°, 7.5° | Hydraulic Cylinder: 3.5" x 8" ASAE tie rod
  • 86"
  • 97 3/8"
  • (Wheels Down): 136"
  • (with tines on the ground): 44 1/4"
  • (w/out added ): 1950 lbs. | Max Ballast in Box: 2200 lbs.
  • Number of Tines: 24 LH & 24 RH | Tine Depth Control - DO NOT TURN W/TINES IN GROUND: Add cylinder donuts to cylinder rod- included | Transportation Lock: Manual cylinder lock | Rear Axle Pivot: Greaseable
  • Tine:Forged & Heat Treated Steel | Rotor Bearings: Heavy duty greaseable bearings